HISENSE QSFP28 AOC Cable – 100M OM4 multi-Mode Fiber, 100Gbps Active Optical Cable

Introduction

In ultra-high-speed networking environments where bandwidth, reliability and future-proof design are non-negotiable, the HISENSE QSFP28 AOC Cable stands out as a premium solution. This 100-metre version supports OM4 multi-mode fiber and delivers up to 100 Gbps of throughput—making it perfect for large data centers, aggregation/backbone links, cloud infrastructures and enterprise networks aiming for next-generation performance.

What is the HISENSE QSFP28 AOC Cable?

The HISENSE QSFP28 AOC Cable is an Active Optical Cable (AOC) built with QSFP28 connectors at both ends, designed for 100 Gbps data rates over multi-mode fiber. This particular model offers a length of 100 metres on OM4 fiber. According to supplier listings, the cable is specified as “100M OM4 multi-Mode Fiber, 100Gbps Active Optical Cable”. 
Active optical designs like this enable longer reach and lower power consumption compared to passive copper or low-end cables. The “HISENSE QSFP28 AOC Cable” supports high-density, high-performance networks demanding reliable 100G links.

Key Specifications & Features

Here are the critical specifications typical for a high-quality 100 Gbps QSFP28 AOC like the HISENSE QSFP28 AOC Cable:

• Cable Length: 100 metres on OM4 multi-mode fiber.

• Connector Type: QSFP28 to QSFP28 (plug-and-play).

• Data Rate: 100 Gbps aggregate (e.g., 4×25 Gbps or QSFP28 standard).

• Fiber Type: Multi-mode fiber (OM4) which allows extended reach and higher bandwidth for multi-mode setups.

• Wavelength / Technology: Typically uses VCSEL laser technology at 850 nm for multi-mode fiber.

• Active Optical Cable (AOC): The built-in active electronics convert electrical signals to optical and back, enabling longer distances and better performance than passive cables.

• Industry Compliance: Designed to meet QSFP28 MSA, IEEE 802.3bm/802.3cd, RoHS, and other relevant standards for 100G connectivity.

With such specs, the HISENSE QSFP28 AOC Cable provides a top-tier solution when your network demands 100G links over moderate distances with minimal hassle.

Benefits of the HISENSE QSFP28 AOC Cable

Using this cable offers numerous advantages:

• High Bandwidth & Future-Proofing: The HISENSE QSFP28 AOC Cable supports 100 Gbps links, which allows network architects to scale up from 10G/25G/40G to 100G without redesigning the cable plant.

• Extended Length for Multi-Mode: With a reach of up to 100 metres on OM4 fiber, this cable gives flexibility in rack layouts, equipment placement and aggregation link design.

• Plug-and-Play Convenience: As a pre-terminated active optical cable, the HISENSE QSFP28 AOC Cable is easy to deploy and eliminates the need for separate transceivers + patch cables.

• Lower Power & Heat: Active optical cables often consume less power and generate less heat compared to alternatives, which benefits high-density data center racks.

• Electromagnetic Immunity & Signal Integrity: Optical transmission avoids many of the interference issues copper faces, ensuring stable links over time.

• Compact and Flexible Installation: The optical cable is lighter and easier to manage than equivalent copper assemblies, simplifying cable routing and airflow management.

Applications & Use Cases

The HISENSE QSFP28 AOC Cable is well suited for key applications:

• Data Center Backbone & Aggregation: Link spine switches, leaf switches, or connect server clusters with 100G links over OM4 multi-mode fiber.

• High-Performance Computing (HPC): Supports large-scale compute clusters or storage networks where 100G bandwidth is required.

• Cloud & Hyperscale Networks: For companies needing efficient, high-capacity links with flexible reach and easy deployment.

• Enterprise Core Edge Modules: Upgrading from 10/25/40G to 100G without major infrastructure changes.

• Campus or Intra-Building Links: OM4 multi-mode with 100 m reach enables high-bandwidth links between rooms or floors under one roof.

How to Choose the Right HISENSE QSFP28 AOC Cable

When selecting the HISENSE QSFP28 AOC Cable (or similar 100G AOC), you should check:

• Link Length & Fiber Type: Ensure OM4 multi-mode fiber is installed and that 100 m reach meets your distance requirements.

• Connector Compatibility: Confirm both ends support QSFP28 and your switches/transceivers accept active AOC modules.

• Bandwidth & Future Needs: If you anticipate growth to >100G, ensure infrastructure alignment.

• Environment & Cooling: Active optical cables still draw power and produce heat—ensure your rack environment supports it.

• Cable Management & Routing: Even though the HISENSE QSFP28 AOC Cable is more flexible than copper, proper routing, labeling and slack management remain critical for airflow and maintenance.

Installation & Best Practices

To maximize performance of your HISENSE QSFP28 AOC Cable:

• Clean the optical connectors before installation to avoid dust or contamination.

• Maintain the minimum bend radius recommended by the manufacturer to avoid damage and signal loss.

• Use structured cable management to avoid tangling, excessive slack, or cable strain—especially in high-density racks.

• Label both ends clearly and document port mapping, simplifying future troubleshooting.

• After installation, verify your link status, throughput and optical diagnostics (if supported) to ensure the HISENSE QSFP28 AOC Cable is functioning as expected.

Compatibility & Considerations

• Ensure your networking equipment supports QSFP28 and 100G optical links; some switches might require specific firmware or compatibility lists for active AOC cables.

• Although the HISENSE QSFP28 AOC Cable uses multi-mode OM4, if your fiber plant is OM3 or single-mode, you’ll need to evaluate performance or alternative solutions.

• While 100 m is supported on OM4, ensure that the actual physical path (including patch panels, slack loops, cross-connects) stays within budget to avoid signal degradation.

• Be aware of thermal environment; active cables generate less heat than some alternatives but still require proper rack cooling.

Environmental & Standards Compliance

The HISENSE QSFP28 AOC Cable adheres to multi-mode active optical cable industry norms. For example, AOC models rated for OM4 often show “maximum link length of 100 m on OM4 MMF” in manufacturer specs. Furthermore, manufacturers highlight compliance with RoHS and other safety standards for optical cabling.

Conclusion

The HISENSE QSFP28 AOC Cable – 100 M OM4 Multi-Mode Fiber, 100 Gbps Active Optical Cable is a first-class solution for modern networks requiring high throughput, long reach over multi-mode fiber, and plug-and-play deployment. With its 100-metre reach on OM4, 100 Gbps bandwidth, QSFP28 connectors, and active optical design, it’s ideally positioned for data centers, enterprise cores, cloud infrastructures and high-density deployments.

Choosing the HISENSE QSFP28 AOC Cable ensures you’re investing in performance, reliability and scalability—so your network can support current demands and grow into future requirements.